Davis Tree Stand #20, 1/pk

Davis Tree Stand #20, 1/pk

SHOCKINGLY SIMPLE TO INSTALL!!

Davis™ stands have been a fixture on many commercial tree lots for decades.  Available in 6 different sizes for trees ranging from 3’ to 20’ tall.  No drilling or special tools necessary, easy installation with the tap of a hammer and a hand crank will stand a tree straight in seconds. Once the stand is installed, simply lift the tree up to a vertical position.  Tree is easily adjusted or straightened by bending slightly after installation.  Larger trees require lag bolts (supplied) to attach stand.  Replacement cranks available.

Recomended Tree Size = up to 20 foot. Please note that when these stands were named (#'s 6-20) back in the 1970's, the number on the stand coresponded to the maximun tree height the stand would hold. Since 1970 commercially farmed Christmas trees have increased in weight. Due to this fact please keep in mind that for heavier trees, use a larger stand. (e.g. use a DTS10 for a heavy 8 foot tree).

Recomended Bowl Sizes:

• DTS8-10 use Medium Flat Bottom 5 quart bowl (see Wood Stands & Bowls page)
• DTS10-12 use Large 2.5 gallon bowl (see Wood Stands & Bowls page)
• DTS15-20 use Super 7 gallon bowl (see on Davis stand page)